The DOTO ME-8107 uses an all-direction adjustable wire rod lever, ideal for detecting passing objects where approach direction or angle is unpredictable, such as on slides, doors and rotating parts. The 120 mm steel rod can be bent to any required form without affecting the internal snap-action c...
Documentation & pre-shipment inspection available
View specifications /
9 kV pin insulator for 11 kV class lines, porcelain body with deep sheds for coastal and industrial pollution, IEC 60383 tested.
Documentation & pre-shipment inspection available
View specifications /
The DOTO HM1 hour meter is a compact electromagnetic running-time meter for panels that need a clear hours readout. The 6-digit drum counter with red decimals shows accumulated operating hours at a glance, while the quartz time base keeps the reading stable over a long service life. Designed for...
Documentation & pre-shipment inspection available
View specifications /
This RW type drop-out fuse cutout is rated 12 kV for pole-mounted transformer protection and line sectionalizing on medium-voltage distribution systems. Two frame sizes - 100 A breaking 10,000 A and 200 A breaking 12,000 A - share the same 41 x 34 x 10 cm outline, so utilities can standardize on...
Documentation & pre-shipment inspection available
View specifications /
CSK4-YKW is a 4-digit panel-mounting electromagnetic counter covering 0-9999 counts for presses, packaging machines and production-line tallying. It accepts DC 12 V / DC 24 V / AC 110 V / AC 220 V supplies, counts at 20 cps on DC and 10 cps on AC, and survives 20,000,000 operating cycles - a depe...
Documentation & pre-shipment inspection available
View specifications /
JKW5C-12 is a 12-step automatic power factor compensation controller for larger capacitor banks that need fine reactive power resolution. Working on 380 V or 220 V networks, it drives 12 capacitor steps, shows power factor from Lag 0.001 to Lead 0.001, and protects the bank with 300 V under-volta...
Documentation & pre-shipment inspection available
View specifications /
BSMJ0.45-20-3 is a 20 kvar three-phase self-healing shunt capacitor for 0.45 kV power factor correction banks in factories, substations and commercial buildings. Metallized polypropylene film with paraffin-wax impregnation gives low losses and self-healing breakdown behaviour, and the built-in di...
Documentation & pre-shipment inspection available
View specifications /
The DOTO M6-63 2P miniature circuit breaker protects both line and neutral of single-phase 230/400V circuits with a common blue handle. Two poles open simultaneously on trip, which is required for circuits where the neutral must be disconnected, such as generator changeover panels and TT systems....
Documentation & pre-shipment inspection available
View specifications /
CJ19-32 (CJ19-32/11) switches shunt capacitors up to 20 kvar at 380/400 V in automatic power factor correction cabinets. Its built-in pre-charge contacts and damping resistors restrain the closing inrush current to 20 x Ie, extending contact and capacitor life in frequently switching compensation...
Documentation & pre-shipment inspection available
View specifications /
KCT-58 is a measuring current transformer spanning 200/5 to 1000/5, one frame covering the whole medium-load range for factories, distribution rooms and energy management systems. With Class 0.5 outputs up to 5 VA and Class 1 outputs up to 10 VA at 720 V, it feeds meters and transducers accuratel...
Documentation & pre-shipment inspection available
View specifications /
LR2-D33 (JR28-93) is a thermal overload relay for larger motor circuits, plugging onto LC1 / CJX2-40 to CJX2-95 contactors and covering 23 A to 93 A in seven current ranges (D3353-D3365). Bimetal overload and phase-failure protection, tool-free current dial, selectable manual / auto reset and 1 N...
Documentation & pre-shipment inspection available
View specifications /
The DOTO ME-8108 is a mini limit switch with an adjustable slotted roller lever of 105 mm, letting the trip point be set anywhere along the arm for fine positioning on conveyor edges, machine slides and doors. The snap-action 1NO+1NC contact switches up to 10A at 250VAC, and the slot-and-screw cl...
Documentation & pre-shipment inspection available
View specifications /We source across the full electrical range, not just the families shown here. Send us your sourcing list and we will match the exact model, certificate, MOQ and voltage standard for your market.
One invoice, one inspection, one consolidated container — even when the goods come from different factories.
